Fitting Instruction

  • Position the resporator in your hands with the nose piece at your fingertips.
  • Hold respirator in your hand as shown, with the left hand holding the left strap and the right hand holding the right strap.
  • Place the respirator over the nose, mouth, and chin. Pull the left and right strap so that the top of the strap goes above the ear and the bottom of the strap goes below the ear.
  • Place your fingertips from both hands at the top of the metal nose chip (if present). Slide fingertips down both sides of the metal strip to mold the nose area to the shape of your nose.
  • Checking for tightness, exhale sharply, negative pressure should be felt in the mask, re-adjust or repeat step 4 as necessary. Adjust the tightness as necessary by pulling the ear loop chip on each side.
Protects against non-toxic dust, fibers pollution, and more! Conforms to GB2626-2006 KN95

INTENDED USE:

The Mediconcepts KN95 Particulate Respirator (#0-2676) is a single-use disposable respirator (Non-Sterile). It is intended to be worn by healthcare workers as well as the general public to control airborne exposure of infectious and bacterial particles.

The respirator conforms to GB2626 certification and CDC Guidelines under the COVID-19 Emergency use Authorization (EUA).

Manufactured by: HUIZHOU RD PLASTIC CO. LTD.
Address: Guangtouling Village | Banli Management District | Lilin Town |
Zhongkai Gaoxin District | Huizhou | Guangdong | 516035 | CHINA
Manufactured for:
CREATIVE CONCEPTS MANUFACTURING LTD
Suite F2, 3rd Floor, Phase 2, Hang Fung Industrial Building,
No. 2G, Hok Yuen Street, Hung Hom, Kowloon, Hong Kong
Tel: (852) - 27736401 / 2 (8 lines) Fax: (852) - 27736403
E-mail: OEM@CreativeConceptsMfg.net
Distributed by:
CREATIVE CONCEPTS USA
Hoboken | NJ 07030 | USA
Tel: 1-201-6562077 Fax: 1-201-6562088
Email: contact@creativeconceptsusa.com

www.mediconceptsgroup.com